IN-12 Raspberry outlet Pi Hat and Shield Nixie Tubes Clock [with options]

IN-12 RASPBERRY PI HAT NIXIE TUBES CLOCK


Project “Divergence Meter HAT”
Arduino Shield/Adapter/Raspberry Pi Nixie Clock
Designed for 6 IN-12 (AB) xUSSR Nixie Tubes with Sockets
IN-12 Tubes are one of the most popular mass-produced Nixie Tubes
Nixie Clocks are one of the most beautiful and popular Vintage Clocks
Clock features Startup Tune, RGB backlight, USB port for updates
Options include Tubes, Raspberry Pi and Power Supply
Accessories include Temp. sensor, GPS Receiver, IR Remote
Clock features Adapter from Arduino Shield to Raspberry Pi Board
Shield Board is designed for Arduino UNO and MEGA 2560 Boards
It allows you to write your own uniqe programs for the Arduino platform
All the latest Source codes are always available on our GitHub channel
PCB, Design, Schematics, Case and Software made by GRA & AFCH



LISTING INCLUDES:

Shield HAT Tubes Clock with Sockets (NCS312+NCS3XX Adapter Boards)
IN-12 Nixie Tubes – 6 pcs Set (included with the Shield HAT Board)
Raspberry Pi Control Board (3xx) (optional, choose in selector)
Power Supply (12V, 1A) (US, EU, UK, AU) (optional AC plug, choose in selector)
User Manual on Vintage style paper


Shield HAT Board features Socket pins for Nixie Tubes

Shield to Raspberry Pi Adapter is included with the Shield HAT Clock

Raspberry Pi Control Board is optional for the Clock

Power Supply is optional for the Clock



OUR BENEFITS:

All our Nixie Tubes Clocks are using HV513WG chips,
it provides higher brightness in multiplexing mode in comparison with HV5812 chip and greater reliability compared to legacy K155ID1
We offer flexible Tubes Boards platform, that support many Nixie Tubes
(out Tubes Boards designed for IN-4, IN-8, IN-8-2, IN-12, IN-14, IN-16, IN-17, IN-18 and Z573, Z5660M, ZM1042, Z568M Nixie Tubes)
It is easy to build a beautiful Nixie Tubes Clock with our Boards, we also offer Acrylic, Wooden and Stone Cases for our Clocks
Fast uploading pf the Firmware via USB to the Control Board
All the latest version of the Firmwares to all our Nixie Clocks are always available on our GitHub channel
No need for additional drivers, we are using only genuine USB-to-serial converters (FTDI),
drivers for them are pre-installed in all popular OSes: Windows, MacOS, Linux
It is easy to modify the Nixie Clock's Firmware functions for your tasks due to the open Arduino platform
We use High Quality PCBs and Components, also we use Japanese aluminum capacitors only for our Boards (Nichicon, Panasonic)
Tubes Board is easy to modify by cutting if you want to build 4 Tubes Clock [HH:MM] from 6 Tubes Clock
Our Nixie Boards use Power On Self-Test (POST): LED backlight flashing,Tubes flashing and Start up Tune. Our Boards use,
Firmware version can be seen at the end of the POST test
Our Tubes Boards use Unique detailed Tube test – our soft test checks each Tubes segment on every Tube so it distinguishable to see segments failures
We provide competent technical support for all our products



SOFTWARE FEATURES:

6 digits IN-12 Nixie tubes [hh:mm:ss].
12/24 hour format.
Time synchronization via the Internet
Full static display mode. The maximum possible brightness of the tubes.
Automatic update information on the tubes.
Unique RGB LED backlight with 16,7 million colors.



HARDWARE FEATURES:

Integrated adjustable High Voltage Power supply: 150 – 220 V.
3 PWM channels for RGB LEDs 8 bit per channel = 24bit = 16,7 million colors.
Test points for testing, adjusting and controlling low and high voltage circuits.
Internal buzzer.
Highly Accurate RTC (Real Time Clock) DS3231SN with Backup battery.
3 buttons on board to control.
IR receiver TSOP4836 for IR remote controllers (In case of using Arduino UNO, they may conflict with “Tone” library). If you plan to use remote control, we strongly recommend the using of Arduino MEGA – works fluently..
Temperature sensor connector (DS18B20; 1-Wire protocol).
8 pcs of RGB SMD LEDs.
SPI up to 4Mhz.
Places for 2 column with 2 neon dots inside.
Separate controls upper and lower dots.
Power consumption: 11-14 VDC, 750 mA. Recommended: 12 VDC, not less than 1A. Power supply connector dimensions 5.5 x 2.1mm (center pin positive “+”).
Reverse polarity protection.
Nixie Tubes Clock Shield NCS312 IN-12 size: 200(L) x 54(H) x 53.34(W) mm (7.87 x 1.2 in).



SHIPPING AND RETURN INFORMATION

All Items are shipped from Ukraine
Via International registered Airmail
Shipments are made within 1 business day
After the payments are received and verified
It takes about 4-7 days via UPS Express delivery
It takes about 10-18 days via Standard shipping
It takes about 35-45 days via Economy shipping
We combine multiple Items to save on shipping



UPS Express Shipping time (recommended):

Europe: 3-5 days
Germany: outlet 3-5 days
USA, Canada: 4-7 days
Asia, South America: 5-7 days
Australia, New Zealand:5-7 days
Africa, Central America:5-7 days



Standard Shipping time:

Europe: 10-12 days
Germany: 25-30 days
USA, Canada: 10-15 days
Asia, South America: 10-18 days
Australia, New Zealand:12-18 days
Africa, Central America:12-18 days



Economy Shipping time:

Europe: 25-30 days
Germany: 25-30 days
USA, Canada: 30-35 days
Asia, South America: 35-45 days
Australia, New Zealand:45-55 days
Africa, Central America:45-55 days
Return Policy



All Returns are accepted

For Return you should contact Us within 14 Days after receiving the Item
Refunds are made as Money back or Replacements (buyer's choice)
Return shipments are paid by the buyer
No restocking fees are charged