Micro Paragon 59" Half-size of our Open Class 150-pc. Laser Cut Balsa/Ply Parital Kit with outlet 1 sheet 36 x 48 Plans Tom Martin Radio Control

Laser cut partial kit with plan at one half scale of the original 118" span Paragon glider produced in the outlet 1970's plus the addition of pre-cut parts for the entire tailgroup outer frame and spars from from 1/4" balsa.

Kit includes more than 150 individual cut parts!!! Note that our partial kit does not include the lower wing sheeting at the dihedral and polyhedral joints on the lower surface of the wing, the canopy. It does include basswood spars laser cut to size and 18 sq. in. of extra stock on sheet 04 to strip cut roughly 15 qty. 1/16" square stringers to complete wing construction

Partial kit contents parts by sheet:
Plan Sheet 1 (contains both sheets 1 of 2 and 2 of 2 from full size Paragon combined on a single sheet).
Laser Cut - Parts Kit
Sheet 01 - 1/8" balsa, 2” x 18” tail tips, spars, gussets, nose block laminations.
Sheet 02 - 1/8" balsa, 2” x 18” aft fuselage sides, canopy base.
Sheet 03 - 1/8" balsa, 3” x 18” fuselage sides, bulkheads, tailskid laminations.
Sheet 04 - 1/16" balsa, 2” x 18” wing ribs and remaining 1" x 18" portion at lower edge for strip cut wing stringers.
Sheet 05 - 1/16" balsa, 2” x 24” wing ribs.
Sheet 06 - 1/16" balsa, 3” x 18” wing ribs.
Sheet 07 - 1/16" aircraft plywood, 2” x 12” wing joiner, fuselage bulkheads, tow block, dowel doublers.
Sheet 08 - 1/16" balsa, 3“ x 18”, wing spar shear webs balsa.
Sheet 09 - 1/16" basswood, 2“ x 18”, wing spars.

Hardware and Miscellaneous required to complete (may not be complete list).
Trailing and Leading edge stock
Pushrod Rudder/Elevator 36" Sullivan S505 or similar
Control Surface Hinges, six to eight qty.
1/2A Control Horns (2)
Tow Hook - 4-40 with Blind Nut, Lock Nut and Washer
1/8" x 1/2" x 12" Spruce nose skid
1/2" x 10" adhesive backed foam tape
Cements and Covering Materials.


Tom Martin Radio Control - TMRC